Fire Alarm
Manual Call Point >>Addressable

MINERVA MX Addressable Callpoints

MX Indoor Callpoint
The CP820 is an indoor MX addressable manual callpoint with programmable status LED. The CP820 is designed for LPCB approvals. The CP820 provides high speed communication to the MX panel of a manual fire alarm.
MX Intrinsically Safe Callpoints
The CP840Ex is an addressable callpoint for use on the ATEX Certified System 800. System 800 is compatible with the MX range of addressable controllers.

The EX II 2GD Dust Approved & Increased Safety (EExedm) Conventional Break Glass Manual Alarm Call Point is fitted with a 470 ohm Alarm Level Resistor and a 4K7 ohm EOL Resistor for use with Tyco Conventional Detection Circuits including the DIM800 and DDM800 MX Modules.
MX Outdoor Callpoints
The CP830 Weatherproof Break Glass Callpoint is designed to monitor and signal the condition of the switch contact associated with the break glass. The CP830Exn weatherproof addressable callpoint is designed to comply with EN 60079-15 : 2003 for Type of Protection ‘n’ apparatu.
MINERVA 8/16E/80 Addressable Callpoints
A comprehensive range of callpoints for use with both conventional and addressable systems. All of the callpoints are designed to enable an alarm signal to be given by breaking a glass element which operates a switch and is indicated by a LED indicator.

If required, an optional transparent hinged cover may be installed to guard against accidental operation.
  • Integral LED indicator for easy identification of operation
  • Surface or flush mounting
  • Extensive range of conventional and analogue addressable callpoints
  • Test key facility speeds maintenance visits
  • Optional transparent hinged cover
  • Hazardous areas models available
  • IP67 Waterproof models for external applications